Thor HD Video Encoder & DVB-S2 Modulator - Manual (Page 12)

THOR H-1SDI-DVB-S2
~ 9 ~
3.2 General Setting
From here you can establish all necessary configurations and modifications to
adjust the unit work properly in your infrastructure.
3.2.1 Alarm Status
Setting the triangle to point at menu 1, enter into this menu by pressing “Enter”.
If the device is working normally, it indicates No Warning as below:
The alarm indicator will turn on if there is no A/V signals input; or if there is a
TS bit rate overflows.
3.2.2 Encode Settings
Similarly, enter this menu to modify parameters of video bit rate and audio bit
rate.
Enter sub-menu Video Bit Rate to adjust the bit rate by pressing right/left and
up/down key and to confirm by pressing Lock key:
► 1 Alarm Status
2 Encode Setting
3 Modulate Setting
4 BISS Modulate
5 Network Setting
6 Saving Config
7 Loading Config
8 Version
Alarm Status
No Warning
Alarm Status
TS overflow
Video Bit Rate
08.000Mbps
► Video Bit Rate
Audio Bit Rate