Thor HD Video Encoder & DVB-S2 Modulator - Manual (Page 13)

THOR H-1SDI-DVB-S2
~ 10 ~
Audio Bit Rate can be selected similarly (bit rate range: 64 /96 /128 /192 /256
/320 Kbps):
3.2.3 Modulate Setting
Enter this menu (3) to set the parameters of modulation:
Modulate Mode: Select one of the following 3 modes: DVB-S, DVB-S2-QPSK
and DVB-S2-8PSK through UP/DOWN key and confirm the setting by pressing
Enter.
DVB-S FEC: S elect one DVB-S FEC from 1/2, 2/3, 3/4, 5/6 and 7/8 by
pressing RIGHT/LEFT key.
NOTE: Modulate Mode 3.1.1 DVB-S must be selected under menu 3.1,
then it will operational.
DVB-S FEC: S elect one DVB-S2 FEC from QPSK1/2, QPSK3/5…and
Audio Bit Rate
► 128 Kbps
► 3.1 Modulate Mode
3.2 DVB-S FEC
3.3 DVB-S2 FEC
3.4 Symbol Rate
3.5 Roll Off
3.6 DVB-S2 Pilot
3.7 RF Frequency
3.8 RF Out Level
3.9 RF Out
3.10 Spec Invert
Modulate Mode
3.1.1 DVB-S
DVB-S FEC
1/2 2/3 3/4