TEKVOX 380-HD Camera - Manual (Page 10)

LENS OSD
Press “LENS OSD” button on remote controller to display and make changes to the camera’s Lens and its
image quality. When changes are made to these settings, their values
are stored in the camera’s
nonvolatile memory.
 ISS (Image Stable Mode) Default value: NO
o SUPPORT/NO Support option
 ISE (Image Stable Mode) Default value: OFF
o ISE: ON/OFF
 BLC (Back light comp) Default value: OFF
o BLC: ON/OFF
 SELECT SCENE Default value: INACTIVE
o Select scene: ACTIVE/INACTIVE
 SELECT SCENE Default value: NIGHT
o Under Active situation: AUTO/WDR/HIGH/NIGHT option
 METERING LIGHT MODE Default value: WDR
o Optional Mode: CENTER/SPOT/WDR
 EXPOSE MODE Default value: PAE
o Mode option: MANUAL/PAE/AAE/SAE
 APERTURE MODE Default value:F1.8
o Aperture range: F1.8 —F11
 SHUTTER SPEED Default value:1/5
o Shutter speed range: 1/5
—1/4000
 EV CORRECTION Default value:+0
o Option value: -2/-1.66/-1.33/-1/-0.66/-0.33/0/ +0.33/+0.66/+1/ +1.33/+1.66/+2
 ISO SENSITIVITY Default value: AUTO
o Option value: AUTO / MANUAL
 MANUAL SETUP Default value:IS080
o Under manual ISO sensitivity, the parameter could be set to:
ISO80/ISO100/ISO200/ISO400/ISO800 /ISO1000
 FLICKER REDUCTION Default value: ON
o Option: ON / OFF
 WHITE BALANCE Default value: AUTO
o Option value: AUTO/CUSTOM/MANUAL/DAYLIGHT
/CLOUDY/SHADE/FLW/FLN/FLD/TUNGSTEN
 DIGITAL EFFECT Default value: NORMAL
o Value option: NORMAL/SEPIA/MONOCHROM/ POSTERIZE/SOLARIZE/NEGA
 SHARPNESS REDUCTION Default value: MIDDLE
o Setting option: HIGH/MIDDLE/LOW
 NOISE REDUCTION Default value: MIDDLE
o Setting option: HIGH/MIDDLE/LOW/OFF
 CHROMA KEY CR Default value: LOW
o Setting option: HIGH/MIDDLE/LOW
 CHROMA KEY CB Default value: LOW
o Setting option: HIGH/MIDDLE/LOW
 AUTO SLOW SHUTRER Default value: OFF
o In the situation of the light is dark to increase lighting volume.