Dukane Data Video Projector 8103H - Manual (Page 7)

6
5. Using the security bar and slot
This projector has the security bar for a
commercial anti-theft chain or wire up to 10 mm
in diameter, and also the security slot for the
Kensington lock.
For details, see the manual of the security tool.
Security slot
Security bar
NOTE
• These are not provided as comprehensive theft
preventions but supplemental measures.
WARNING
■ Do not place the anti-theft chain or wire near the projector’s exhaust vents, since the
chain or wire heated by the hot exhaust gas may cause a burn.
■ Do not use the security bar or slot for the purpose of fall prevention, since these are
not designed for it.
6. Using the cable cover
Utilize the cable cover as the guard and blind for the connecting parts.
1. Connect the signal cables and the
power cord to the projector first.
2. Attach the cable cover to the
projector, uniting the interlocking
parts.
3. Tighten the screw to fix the cable
cover.
4. Connect the other ends of the cables
to other devices, and plug the power
cord to the power outlet.
Cable cover
Screw
Interlocking parts
Screw driver
CATION
■ Be careful not to pinch the cables in the cable cover, to prevent damage to the cables.
d11_01CP-A200_CO_ENG.indd 6 2009/12/22 9:37:54