beautypg.com

Signamax 10/100 Industrial DIN-rail Mount Power over Ethernet Unmanaged Switches User Manual

Page 3

background image

Hardened PoE Ethernet Switch

3

FAULT

*Relay warning signal disable for
following:
The relay contact closes if Power1
and Power2 are both failed but
Power3 on.
The relay contact closes if Power3
is failed but Power1 and Power2
are both on.



DC Terminal Block Power Inputs: There are two pairs of
power inputs can be used to power up this switch. Redundant
power supplies function is supported.

The 10/100BaseT/TX and 100BaseFX Connectors

1. The 10/100BaseT/TX Connections
The following lists the pinouts of 10/100BaseT/TX ports.

Pin Regular

Ports

Uplink

port

1

Input Receive Data +

Output Transmit Data +

2

Input Receive Data -

Output Transmit Data -

3

Output Transmit Data +

Input Receive Data +

4 NC

NC

5 NC

NC

6

Output Transmit Data -

Input Receive Data -

7 NC

NC

8 NC

NC


2. The 100BaseFX Connections
The fiber port pinouts: The Tx (transmit) port of device I is
connected to the Rx (receive) port of device II, and the Rx