beautypg.com

Cabling – Signamax 10/100 Industrial DIN-rail Mount Unmanaged Switches User Manual

Page 19

background image

Hardened Ethernet Switch

19

Cabling

Step 1: First, ensure the power of the switch and end devices are turned off.

Always ensure that the power is off before any installation.

Step 2: Prepare cable with corresponding connectors for each type of port

in use.

Step 3: Consult the previous section for cabling requirements based on

connectors and speed.


Step 4: Connect one end of the cable to the switch and the other end to a

desired device.


Step 5: Once the connections between two end devices are made

successfully, turn on the power and the switch is operational.