beautypg.com

Din rail mounting, Connecting to power, Dc terminal block power input – Signamax 10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened Компьютерные Аксессуары User Manual

Page 12: Dc jack, Ounting, Onnecting to, Ower

background image

Signamax 10/100TX to 100FX Industrial PoE Media Converter

10

User’s Manual

DIN Rail Mounting

 Fix the DIN rail attachment plate to the back panel of the Media Converter.
 Installation: Place the Media Converter on the DIN rail from above using

the slot. Push the front of the Media Converter toward the mounting
surface until it audibly snaps into place.

 Removal: Pull out the lower edge and then remove the Media Converter

from the DIN rail.

Connecting to Power
Redundant DC Terminal Block Power Input and DC Jack:

DC Terminal Block Power Input
 Connect the DC power cord to the plug-able terminal block on the Media

Converter, and then plug it into a standard DC outlet.

 Disconnect the power cord if you want to shut down the Media Converter.

DC Jack
 Connect the supplied AC to DC power adapter to the receptacle on the

Media Converter.

 Connect the power cord to the AC to DC power adapter and attach the

plug into a standard AC outlet with the appropriate AC voltage.