Signamax 100BaseFX Singlemode To Multimode Converters - Manual (Page 15)

Signamax
 100TX/FX to 100FX Media Converter
Installation 9
l When the converter is completely seated onto the carrier,
insert the carrier into the guide rails of the expansion slot.
l Carefully slide in the carrier until it is fully and firmly fit
into the chassis. Fasten the screws on the carrier.
NEVER insert any converter into the chassis
directly without using the supplied carriers. The carriers
allow secure and consistent placement of the
converters into the chassis’ backplane without causing
any damage.
Media Converter Carrier provided by FO-065-1180
Chassis