Signamax 100BaseFX Singlemode To Multimode Converters - Manual (Page 11)

Signamax
 100TX/FX to 100FX Media Converter
Ports and LEDs 5
LED Indicators
The LED indicators give you instant feedback on the status of
the converter:
100TX to 100FX media converter:
LEDs State Indication
Steady Power on Power
Off Power off
Steady A valid network connection established
LNK stands for LINK
Flashing Transmitting, TX stands for Transmitting
LNK/TX 1
(100FX)
Off Neither valid network connection nor
transmitting established
Flashing Receiving, RX stands for Receiving RX 1
(100FX)
Off No receiving established
Steady A valid network connection established
LNK stands for LINK
Flashing Transmitting, TX stands for Transmitting
LNK/TX 2
(100TX)
Off Neither valid network connection nor
transmitting established
Flashing Receiving, RX stands for Receiving RX 2
(100TX)
Off No receiving established
Steady Connection in full-duplex mode
(FDX stands for FULL-DUPLEX)
Flashing Collision occurred
(COL stands for COLLISION)
FDX/COL
(100TX)
Off Connection in half-duplex mode