Signamax 10/100/1000BaseT/TX to 100/1000Base SFP Switching Media Converter - Manual (Page 7)

Signamax
 Dual Rate SFP Media Converter
User’s Manual 5
Product Features
•
Complies with IEEE802.3 10BaseT, IEEE802.3u 100BaseTX/FX,
IEEE802.3ab 1000BaseT, and IEEE802.3z 1000BaseSX/LX.
•
Supports IEEE802.3x Flow control: Flow control for Full-duplex and
Back pressure for Half-duplex.
•
SFP fiber interface supports 100Base and 1000Base dual rate fiber
transmission.
•
DIP switch configuration for “Link Fault Signaling”.
•
Gigabit transmission supports 9K Bytes jumbo frame.
•
1000Mbps-Auto/Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-
Negotiation, Auto-MDI/MDIX.
•
Full wire-speed forwarding rate.
•
Operating voltage and Max. current consumption: 0.23A @ 12VDC.
Power consumption: 2.76W Max.
•
Power Supply: 12VDC external universal PSU.
•
32℉ to 122℉ (0℃ to 50℃) operating temperature range.
•
Aluminum case.
•
Supports Wall Mounting installation or use with media converter
chassis system.
DIP Switch
No. Down Up
1 Disable LFS Enable LFS
2 Enable Auto-Negotiation for TX port Enable Force mode for TX port
3 TX port Force mode: Full-duplex TX port Force mode: Half-duplex
4 TX port Force mode: 100Mbps TX port Force mode: 10Mbps
5 SFP at 100Mbps SFP at 1000Mbps
6 Function reserved Function reserved
LFS: Link Fault Signaling function. Power must be off/on after re-
setting LFS function.
Packing List
When you unpack this product package, you will find the items listed below.
Please inspect the contents, and report any apparent damage or missing
items immediately to our authorized reseller.