Signamax 10/100BaseT/TX to 100BaseFX Converters w/USB Power Option - Manual (Page 8)

Signamax
™
10/100TX to 100FX Media Converter
User’s Manual 5
Product Features
One-channel media conversion between 10/100BaseTX and 100BaseFX
Fiber media allows:
Multi-mode fiber using SC, ST, VF-45, MT-RJ or LC connector
Single-mode fiber using SC connector
WDM single-fiber (bi-direction) transceiver: Single-mode WDM fiber uses
SC connector
A type: WDM single-fiber (bi-direction) transceiver transmits with 1310nm
wavelength and receives with 1550nm wavelength
B type: WDM single-fiber (bi-direction) transceiver transmits with 1550nm
wavelength and receives with 13100nm wavelength
Auto negotiation of speed and duplex mode on TX port
Auto MDIX on TX port
One DIP switch for configuring link-fault-pass-through, fixed speed, and
half/full duplex
Store-and-forward mechanism
Non-blocking full wire-speed forwarding rate
Support broadcast storm filtering
Back-pressure & IEEE802.3x compliant flow control
Front panel status LEDs
USB bus power and/or external AC to DC power adapter
External AC to DC power adapter
Used as a stand-alone device or with a chassis
Hot-swappable when used with a chassis
Packing List
When you unpack this product package, you will find the items listed below. Please
inspect the contents, and report any apparent damage or missing items immediately
to our authorized reseller.
The Media Converter
User’s Manual
AC to DC Power Adaptor