Signamax 10/100BaseT/TX to 100BaseFX Converters w/USB Power Option - Manual (Page 13)

Signamax
™
10/100TX to 100FX Media Converter
10 User’s Manual
Installing in a Chassis
The Converter can be fit into any of the expansion slots on a
special designed chassis.
First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew the carrier from the desired expansion slot on the chassis.
Step 2- Fit the converter onto the carrier.
When the converter is completely seated onto the carrier, insert the carrier
to the guide rails of the expansion slot.
Carefully slide in the carrier until it is fully and firmly fit the chassis. Fasten
the screws onto the carrier.
Never insert any converter into the chassis directly without using the
supplied carriers. The carriers allow secure and consistent placement
of the converters into the chassis’ backplane without causing any
damage.
Specifications
Applicable Standards IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX & 100BaseFX
Fixed Ports 1 TX port, 1 FX port
10/20Mbps for half/full-duplex
Speed
10BaseT
100BaseTX/FX
100/200Mbps for half/full-duplex
Switching Method Store-and-Forward
Forwarding rate 14,880/148,800pps for 10/100Mbps
Per Unit- (2 LEDs): Power; 100(Mbps) LED Indicators
Per Port- (2 LEDs): LNK/ACT; FDX/COL
Dimensions L110 × W81 (max.) × H23 mm
Weight 190 g
Power
USB bus power 5VDC, 0.5A
External power adaptor 12VDC, 0.6A
Power Consumption 7W Max.
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature -25°C ~ 70°C (-13°F ~ 158°F)
Humidity 10 ~ 90%, non-condensing
Emissions FCC part 15 Class A, CE Mark