Specifications, English – Denon AVR-487 User Manual
Page 47
ENGLISH
ENGLISH
44
Specifications
¢ Audio section
• Power amplifier
Rated output:
Front (A, B):
75 W + 75 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
75 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
75 W + 75 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output terminals:
Front:
A or B
0
6 ~ 16 Ω/ohms
A + B
12 ~ 16 Ω/ohms
Center, Surround:
0
6 ~ 16 Ω/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 kΩ/kohms
Frequency response:
10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N:
98 dB (DIRECT mode)
¢ Video section
• Standard video terminals
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
• S-Video terminals
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
• Color component video terminal
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
B
/C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 30 MHz — +0, –3 dB
¢ Tuner section
[FM]
[AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB
STEREO
72 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
¢ General
Power supply:
AC 120 V, 60 Hz
Power consumption:
3.8 A
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-27/64”)
Mass:
10.5 kg (23 lbs 2.4 oz)
¢ Remote control unit (RC-1050)
Batteries:
R6P/AA Type (Two batteries)
External dimensions:
52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass:
175 g (Approx. 6.2 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.