Denon AVR-487 - Manual (Page 26)

Basic Operation Basic Operation
ENGLISH
23
ENGLISH
¢ DIRECT mode
This mode is for playing with high quality sound. The audio signals are
transmitted directly, without passing through the tone circuits, etc.
Selecting the play mode (DIRECT/STEREO)
The AVR-487 is equipped with two 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
Press [DIRECT/STEREO] to select “DIRECT”.
STEREO DIRECT
¢ STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
Press [DIRECT/STEREO] to select “STEREO”.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
STATUS
D H F G
INPUT MODE
D H F G
SURROUND
PARAMETER
[STANDARD]
[DIRECT/STEREO]
ENTER
SURROUND PARAMETER D H
STATUS F G, ENTER INPUT MODE
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
Play a program source with the , mark.
• “ ” or “ ” lights, depending on the source.
Press SURROUND PARAMETER .
Press D D H H to select the item, then press F F G G to set.
The parameter switches as shown below each time the button is
pressed.
Press [STANDARD] to select “STANDARD (Dolby/DTS
Surround)”.
3
6
5
4
Select an input source for which digital (COAXIAL or
OPTICAL) is set (
page 19).
1
Press INPUT MODE to select “AUTO”. 2
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
Dolby Pro Logic
II / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6 / NEURAL SURROUND
CINEMA EQ D.COMP. LFE
TONE DEFEAT DEFAULT
If you do want the bass and treble to be adjusted, turn off the tone
defeat mode.