English – Denon AVR-487 User Manual

Page 17

Connecting Other Sources

ENGLISH

Connecting the iPod

iPod

ASD-1R

AUDIO OUT

S-VIDEO OUT

When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCK
CONTROL jack on the AVR-487 with a mini-jack and assign the iPod to any AUDIO and/or S-VIDEO
terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the DVD/VDP
terminal.

For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” (
page 19).
For instructions on playing the iPod, see “Playing the iPod” (

page 34).

• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.

Connecting the power supply cord

AC 120 V, 60 Hz

AC outlet

(wall)

NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other

electrical appliances.

AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A.))

The power to the outlet is turned on and off in
conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit’s power is at standby. Never connect
equipment whose total power consumption
exceeds 120 W (1 A.).