Delphi NAV200 - Manual (Page 20)

Delphi NAV200
20
Command Buttons
The following buttons appear at the bottom of every navigation screen:
Back: Tap this icon to return to the previous screen. (This icon is
not available on the Main Screen.)
Main Screen: Tap this icon to open the Main Screen.
In addition, you will see one of three GPS symbols in the upper right corner:
No GPS: A GPS receiver is not connected or the power supply is
interrupted.
No Signal: A GPS receiver is connected, but no signal is being
received
.
GPS Ready: Signal received .
Tapping the icon displays the current GPS status screen: