Paxton Superchargers Dodge Viper User Manual

Page 18

5-2

P/N: 4809644

13DEC04 v2.0 03-05Viper(4809644v2

.0)

Install the primary mounting plate onto the
previously installed studs making sure that
the 8 rib belt is routed around the 8 rib idler.

Install the supplied 5/16" nut and washer
onto the A/C stud.

Insert 3/8 x 1-1/4" bolts through the mount-
ing plate and into the threaded holes in the
upper spacer block and tighten.

Tighten the alternator bolt securing the
upper alternator spacer block.

M. Remove the lower alternator bolt. Install the

supplied 3/8 x 10-1/4" all thread through the
lower alternator mounting location. Install a
supplied nut and a washer on the end of the
all thread behind the alternator. Slide the
lower alternator spacer onto the all thread.

Install the accessory drive belt in its original
configuration by retracting the factory
spring tensioner. (See Fig. 5-d.)

Fig. 5-d

Tighten the alternator pulley nut.