Paxton Superchargers Dodge Viper - Manual (Page 38)

12-2
P/N: 4809643
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
12APR04 v1.1 01-03Viper(4809643v1.1)
12. AUXILIARY FUEL PUMP ASSEMBLY INSTALLATION, cont’d.
FACTORY SUPPLY LINE FROM
FUEL TANK
SUPPLIED
FUEL
PUMPS
FACTORY FLEXIBLE LINE
TO INTAKE MANIFOLD
MARK AND DRILL TWO HOLES.
INSTALL THE SUPPLIED CLAMPS AND
SCREWS TO HOLD THE FUEL PUMPS
RED WIRES WITH STRIPE (FROM
IGNITION TIMING CONTROL BOX)
5/32" HOSE (CONNECTED TO MANIFOLD PRESSURE)
MARK AND DRILL TWO HOLES.
INSTALL THE SUPPLIED SHEET METAL
SCREWS TO HOLD THE FUEL CONTROL UNIT
SUPPLIED FUEL PUMP
FITTINGS (4 PLACES)
(VERIFY THAT THE
COPPER WASHER IS
INSTALLED AND THE
FITTING IS TIGHT)
5/16"
HOSE BARB
TEE (4
PLACES)
CUT THE SUPPLIED EFI FUEL
HOSE TO LENGTH (10 PLACES)
INSTALL AND TIGHTEN CLAMP USING
STEPLESS CLAMP PLIERS (20 PLACES)
6:1 RING SPACER
6:1 WASHER (Ø1.855")
LARGE DIAPHRAM
SPRING RETAINERS
SPRING
FCU COVER
FCU AS
SUPPLIED
00-02
8:1 RING SPACER
8:1 WASHER (Ø2.22")
SPRING RETAINERS
FCU AS
SUPPLIED
96-99
Fig. 12-b