Paxton Superchargers Dodge Viper RT/10 - Manual (Page 38)

12-2
P/N: 4809646
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
17FEB06 v2.0 92-96Viper(4809646v2.0)
12. AUXILIARY FUEL PUMP ASSEMBLY INSTALLATION, cont’d.
FACTORY SUPPLY LINE FROM
FUEL TANK
FACTORY FLEXIBLE LINE
TO INTAKE MANIFOLD
MARK AND DRILL TWO HOLES
INSTALL THE SUPPLIED CLAMPS AND
SCREWS TO HOLD THE FUEL PUMPS
RED WIRES WITH STRIPE (FROM
IGNITION TIMING CONTROL BOX)
5/32" HOSE (CONNECTED TO MANIFOLD PRESSURE)
MARK AND DRILL TWO HOLES.
INSTALL THE SUPPLIED SHEET METAL
SCREWS TO HOLD THE FUEL CONTROL UNIT
SUPPLIED FUEL PUMP
FITTINGS (4 PLACES)
(VERIFY THAT THE
COPPER WASHER IS
INSTALLED AND THE
FITTING IS TIGHT)
5/16"
HOSE BARB
TEE (4
PLACES)
CUT THE SUPPLIED EFI FUEL
HOSE TO LENGTH (10 PLACES)
INSTALL AND TIGHTEN CLAMP USING
STEPLESS CLAMP PLIERS (20 PLACES)
10:1 RING SPACER
10:1 WASHER
LARGE DIAPHRAM
SPRING RETAINERS
SPRING
FCU COVER
FCU AS
SUPPLIED
92-96
8:1 RING SPACER
8:1 WASHER
SPRING RETAINERS
FCU (IF EQUIPPED
WITH OPTIONAL
RING AND SPACER)
VENT
HOSE (8")
SUPPLIED
FUEL
PUMPS
Fig. 12-b