One Systems POPS SUBa - Manual (Page 7)

NOTE: The POPS Sub MUST be located on level ground when the POPS 15 is
mounted on top of the supplied pole.
DO NOT USE OTHER SYSTEMS THAN THE POPS15 WHEN MOUNTING ON
THE POLE.
DO NOT SUBSTITUTE OTHER MOUNTING POLES ON POPS Sub’s
ENCLOSURE!
AC MAINS CABLE
100ft (30.5 m) of SJOW-rated AC mains cable with an IP 68-rated cable end
connector designed to mate to the input panel of the POPSSub enclosure.
INPUT/OUTPUT CABLE
6.6 FT. (2 M) of SJOW-rated two-conductor shielded input/output cable with an
IP 67 rating.
FEATURES AND APPLICATIONS
POPSSub is a very unique product and may be used in “wet” outdoor
environments. Its AC Mains and input/output connectors are designed to provide
a high degree of ingress protection. All mechanical connections are rated IP 67
or higher. POPSSub may be safely installed in outdoor environments as long as
ONLY the supplied cables are utilized. DO NOT SUBSTITUTE CABLES.
POPSSub is a professional product and is designed to be used with a high-
quality mixing console. The POPSSub does not provide any additional, user-
selectable equalization. Equalization functions should be provided by the mixing
console or other outboard devices.