NEXCOM NDiS B532 - Manual (Page 62)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 48 NDiS B532 User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Devices:
1 Keyboard, 1 Mouse, 2 Hubs
Legacy USB Support
USB3.0 Support
[Enabled]
[Enabled]
Legacy USB Support
Enabled
Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are
connected.
Disabled
Keeps USB devices available only for EFI applications.
USB 3.0 Support
Enables or disables the USB 3.0 controller.
USB Configuration
This section is used to configure the USB.
Super IO Configuration
This section is used to configure serial ports 0 and 1.
Super IO Chip
Displays the Super I/O chip used on the board.
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
0 (COMA) Super IO Configuration
Super IO Chip
 Serial Port 0 Configuration
 Serial Port 1 Configuration
IT8728