NEXCOM NDiS B532 - Manual (Page 60)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 46 NDiS B532 User Manual
Chapter 4: BIOS Setup
Graphics Configuration
This section is used to configure the graphics parameters.
LCD Control
Configurations for LCD.
Advanced Boot Security Save & Exit Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
LCD Control Graphics Configuration
LCD Control
LCD Control
This section is used to configure the LCD settings.
Advanced Boot Security Save & Exit Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present.
Secondary boot display selection
will appear based on your
selection.
VGA modes will be supported
only on primary display
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
[HDMI1]
[HDMI3]
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no
effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primary display. The options are HDM1, HDMI2 and HDMI3.
Secondary IGFX Boot Display
Select the secondary display device, the options are Disabled, HDMI1,
HDMI2 and HDMI3.