beautypg.com

NEXCOM NDiS B322 User Manual

Page 20

background image

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

7

NDiS B322 User Manual

Chapter 3: System Setup

3. Note how the module is keyed to the socket. Grasping the module by

its edges, align the module with the socket so that the “notch” on the
module is aligned with the “key” on the socket. The key ensures the
module can be plugged into the socket in only one direction.

Notch

Key

4. Insert the module into the socket. Apply firm even pressure to each end

of the module until it slips down into the socket. The contact fingers
on the edge of the module will almost completely disappear inside the
socket.

The ejector tabs at the ends of the socket will automatically snap into
the locked position to hold the module in place.

This manual is related to the following products: