NEXCOM NDiS 127 - Manual (Page 63)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 38
Chapter 4: BIOS Setup
NDiS 127 User Manual
Security Change Supervisor Password
This field is used to set or change the supervisor password. To set a new
password:
1. Select the Change Supervisor Password field then press .
2. Type your password in the dialog box then press . You are lim-
ited to eight letters/numbers.
3. Press to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press .
The Password Un-installed dialog box will appear.
Change User Password
This field is used to set or change the user password. To set a new password:
1. Select the Change User Password field then press .
2. Type your password in the dialog box then press . You are lim-
ited to eight letters/numbers.
3. Press to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
Save & Exit Advanced Magic Control Chipset Boot Security Main
Version 2.10.1208 Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Opt.
F1 General Help
F7 Previous Values
F10
Save and Exit
ESC Exit
Password Description
If ONLY the administrator’s password is set,
then this only limits access to setup and is
only asked for when entering Setup.
IF ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter setup. In Setup the user will
have Administrator rights.
The password must be 3 to 20 characters long.
Administrator Password
User Password
Set Setup Administrator
Password