Advanced – NEXCOM NDiS 127 User Manual

Page 48

Chapter 4: BIOS Setup

NDiS 127 User Manual

Advanced

The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.

Setting incorrect field values may cause the system to malfunc-
tion.

Launch PXE OpROM
This section is used to enable or disable boot option for legacy network
devices.

Launch Storage OpROM
This section is used to enable or disable boot option for legacy storage
devices.

PCI Sub System Setting
This section is used to configure PCI, PCI-X and PCI Express settings.

ACPI Settings
Enables or disables the System ACPI parameters.

S5 RTC Wake Settings
This section is used to Enables or disables system to wake from S5 state
using RTC alarm.

CPU Configuration
This section is used to view detailed CPU specifications and configure the
CPU.

USB Configuration
This section is used to enable or disable the USB controller.

Save & Exit

Advanced

Magic Control Chipset

Boot

Security

Main

← →

Select Screen

↑↓

Select Item

Change Opt.

General Help

F7 Previous Values
F10

Save and Exit

ESC

Exit

Legacy OpROM Support

Launch PXE OpROM

Launch Storage OpROM

PCI Subsystem Setting

ACPI Settings

S5 RTC Wake Settings

CPU Configuration

USB Configuration

Super IO Configuration

H/W Monitor

[Disabled]

[Enabled]

Enable or Disable Boot
Option for Legacy Network
Devices.