Magic control – NEXCOM NDiS 127 User Manual

Page 57

Chapter 4: BIOS Setup

NDiS 127 User Manual

Magic Control

Watch Dog Control
This section is used to enable or disable the Watch Dog Function.

RTC Alarm Control
This function is for setting the Date, Hour, Minute, and Second for your
computer to boot up. During Disabled, you cannot use this function.
During Enabled, Choose the Date, Hour, Minute, and Second.

Onboard LAN Controller
This section is used to enable or disable the Watch Dog Function.

PCIE Slot
This section is used to enable or disable the PCIE Slot Function.

WiFi Slot
This section is used to enable or disable the WiFi Slot Function.

Restore on AC Power Loss

Power Off
When power returns after an AC power failure, the system’s power is off.
You must press the Power button to power-on the system.

Power On
When power returns after an AC power failure, the system will automati-
cally power-on.

Last State
When power returns after an AC power failure, the system will return to
the state where you left off before power failure occurs. If the system’s
power is off when AC power failure occurs, it will remain off when power
returns. If the system’s power is on when AC power failure occurs, the
system will power-on when power returns.

HD Audio Azalia Device
Enable or disable the HD Audio Azalia Device function.

SATA Port
Enable or disable the SATA Port function.

Save & Exit

Advanced

Magic Control Chipset

Boot

Security

Main

← →

Select Screen

↑↓

Select Item

Change Opt.

General Help

F7 Previous Values
F10

Save and Exit

ESC

Exit

Watch Dog Control

RTC Alarm Setting

RTC Alarm Control

Onboard LAN Controller

PCIE Slot

WiFi Slot

Restore on AC Power Loss

HD Audio Azalia Device

OnChip SATA Channel

SATA Port0

SATA Port1

OHCI HC (Bus O Dev 18 FN O)

USB PORT (J5_U)

[Disabled]

[Enabled]

[Power On]

[Enabled]

WDC WD1600BEV...

[Enabled]

Not Present

[Enabled]

Watch Dog Function Enable/
Disable