Boot – NEXCOM NDiS 127 User Manual

Page 62

Chapter 4: BIOS Setup

NDiS 127 User Manual

Boot

Quiet Boot
When enabled, the BIOS will display the OEM logo instead of POST mes-
sage during POST.

GateA20 Active
This option is iseful when any RT code is executed above 1MB.
UPON REQUEST - GA20 can be disabled using BIOS services.
ALWAYS - Do not allow disabling GA20.

Option ROM messages
Set display mode for Option ROM.

Interrupt 19 Capture
When enabled, it will allows option ROMs to trap Int 19.

Boot Option #1
Use the boot options to select the available devices the system boots from.

Hard Drive BBS priorities
Use the Hard Disk Drive BBS priorities options to set the order of the
legacy devices in this group.

Set Prompt Time out
Number of second to wait for setup activation key. 65535(0XFFFF) means
indefinite waiting.

Bootup Numlock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of
the numeric keypad is the number keys. When set to Off, the function of
the numeric keypad is the arrow keys.

Save & Exit

Advanced Magic Control Chipset

Boot

Security

Main

← →

Select Screen

↑↓

Select Item

Change Opt.

General Help

F7 Previous Values
F10

Save and Exit

ESC

Exit

Boot Configuration

Setup Prompt Timeout

Bootup Numlock State

QuietBoot

CSM16 Module Version

GateA20 Active

Option ROM messages

Interrupt 19 Capture

Boot Option Priorities

Boot Option #1

Hard Drive BBS Priorities

Number of second to wait
for setup activation key.
65535(0XFFFF) means indefi-
nite waiting.

[On]

[Enabled]

07.63

[Upon request]

[Force BIOS]

[Disabled]

[SATA: WDC:WD16...]