Chipset, Usb configuration – NEXCOM NIFE 100 User Manual
Page 70
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
56
NIFE 100/101 User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Module Version
USB Devices:
2 Keyboards, 1 Mouse, 1 Hub
Legacy USB Support
USB3.0 Support
XHCI Hand-off
EHCI Hand-off
8.10.27
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
USB3.0 Support
Enables or disables USB 3.0 controller support.
XHCI Hand-off and EHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off and EHCI
Hand-off. The XHCI and EHCI ownership change should be claimed by the
XHCI and EHCI driver respectively.
USB Configuration
This section is used to configure the USB.
Chipset
This section gives you functions to configure the system based on the
specific features of the chipset. The chipset manages bus speeds and access
to system memory resources.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
South Bridge Parameters
► South Bridge