NEXCOM APPC 1240T - Manual (Page 96)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 80 APPC 1240T/1245T/1540T/1740T/1940T User Manual
Chapter 3: System Setup
3. Slide the Panel PC through the hole until it is properly fitted against the
panel.
4. Position the mounting clamps along the rear edges of the Panel PC. The
first and second clamps must be positioned and secured diagonally prior
to mounting the rest of the clamps. Tighten the clamp’s screw until it
touches the panel.
APPC 1940T
Panel
Clamp
366.0
0
436.00 3mm
CAUTION! CAUTION! CAUTION!
Do not overtighten the screws to prevent damaging the
Panel PC.