NEXCOM APPC 1240T - Manual (Page 95)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 79 APPC 1240T/1245T/1540T/1740T/1940T User Manual
Chapter 3: System Setup
Panel Mounting
1. Select a place on the panel where you will mount the Panel PC.
2. Cut out a shape on the panel that corresponds to the Panel PC’s rear
dimensions.
The thickness of the panel (e.g. steel board, plank, acrylic board, wall,
etc.) where you will mount the Panel PC must not exceed 5mm for APPC
1240T/1245T/1540T, 12mm for APPC 1740T, and 3mm for APPC 1940T.
If the distance between the front bezel and panel mount hole is too wide,
it will not fit the panel mount kit.
304.50 5mm
230.00
APPC 1240T/1245T
APPC 1540T
297.00
371.00 5mm
329.00
399.00 12mm
APPC 1740T