NEXCOM APPC 1240T - Manual (Page 111)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 95 APPC 1240T/1245T/1540T/1740T/1940T User Manual
Chapter 4: BIOS Setup
USB Configuration
USB 2.0(EHCI) Support
Enables or disables the Enhanced Host Controller Interface (USB 2.0), one
EHCI controller must always be enabled.
USB RMH Mode
Enables or disables PCH USB rate matching hubs mode.
USB EHCI Debug
Enables or disables PCH EHCI debug capability.
Chipset
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Control the USB EHCI (USB 2.0)
functions. One
EHCI controller must always
be enabled. USB Configuration
XHCI Mode
USB 2.0(EHCI) Support
USB RMH Mode
USB EHCI debug
[Disabled]
[Enabled]
[Enabled]
[Disabled]
PCI Express Configuration
PCI Express Port 0 to PCI Express Port 3
Enables or disables the PCI Express ports 0 to 3 on the chipset.
Chipset
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable the PCI
Express Port 0 in the Chipset. PCI Express Configuration
PCI Express Port 0
PCI Express Port 1
PCI Express Port 2
PCI Express Port 3
[Enabled]
[Enabled]
[Enabled]
[Enabled]