NEXCOM APPC 1220T User Manual
Page 81
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
66
Chapter 3: System Setup
APPC 1220T/1221T/1520T/1521T/1720T/1721T User Manual
Panel
Clamp
5. The illustration below shows all clamps properly mounted.
3. Slide the Panel PC through the hole until it is properly fitted against the
panel.
4. Position the mounting clamps along the rear edges of the Panel PC.
The first and second clamps must be positioned and secured diagonally
prior to mounting the rest of the clamps. Tighten the clamp’s screw
until it touches the panel. Do not overtighten the screws to prevent
damaging the Panel PC.
399,00
329,00
7
APPC 1770T/1771T
This manual is related to the following products: