NEXCOM APPC 1220T - Manual (Page 80)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 65
Chapter 3: System Setup
APPC 1220T/1221T/1520T/1521T/1720T/1721T User Manual
Panel Mounting
1. Select a place on the panel where you will mount the Panel PC.
2. Cut out a shape on the panel that corresponds to the Panel PC’s rear
dimensions.
The thickness of the panel (e.g. steel board, plank, acrylic board, wall,
etc.) where you will mount the Panel PC must not exceed 7mm. If the
distance between the front bezel and panel mount hole is too wide, it
will not fit the panel mount kit.
7
304,50
230,00
APPC 1220T/1221T
7
391,50
291,50
APPC 1550T/1551T