NEXCOM APPC 1220T - Manual (Page 69)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 54
Chapter 3: System Setup
APPC 1220T/1221T/1520T/1521T/1720T/1721T User Manual
2. Insert the module into the socket at an approximately 30 degrees
angle. Apply firm even pressure to each end of the module until it slips
into the socket. The gold-plated connector on the edge of the module
will almost completely disappear inside the socket.
3. Push the module down until the clips on both sides of the socket lock
into position. You will hear a distinctive “click”, indicating the module
is correctly locked into position.
SODIMM SODIMM
socket