NEXCOM NISE 3500 - Manual (Page 70)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 56 NISE 3500, NISE 3500M User Manual
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
Fan Setting
Selects the speed of the fan.
System Temperature and CPU Temperature
Detects and displays the internal temperature of the system and the cur-
rent temperature of the CPU.
System Fan Speed to CPU Fan Speed
Detects and displays the current system fan and CPU fan speed in RPM
(Revolutions Per Minute).
CPU:Vcore to +12V
Detects and displays the output voltages.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
PC Health Status
Fan Setting
System Temperature
CPU Temperature
System FAN Speed
CPU FAN Speed
CPU:Vcore
+3.3V
+5V
+12V
Advanced
[Always Full Speed]
: +30 C
: +28 C
: N/A
: N/A
: +1.056V
: +3.296 V
: +4.915V
: +11.932 V
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Thermal Configuration
This section is used to configure the intelligent power sharing function.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Intelligent Power Sharing
Advanced
[Disabled]
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Intelligent power sharing
configuration menu. Note:
DTS must be enabled for
Power Sharing to function.
Intelligent Power Sharing
Enables or disables the power sharing function.