NEXCOM NISE 3500 User Manual
Page 53
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
40
NISE 3500, NISE 3500M User Manual
5. Before you install the heat sink, apply thermal paste onto the top of
the CPU. Do not spread the paste all over the surface. When you later
place the heat sink on top of the CPU, the compound will disperse
evenly.
6. Align the mounting holes of the heat sink with the mounting studs on
the board and then secure the heat sink with the provided screws.
Mounting stud
This manual is related to the following products: