Pch-io configuration – NEXCOM NEX 607 User Manual
Page 70

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
55
NEX 607 User Manual
Chapter 3: BIOS Setup
PCH-IO Configuration
This section is used to configure PCH-IO configuration..
PCH LAN Controller
Enables or disables onboard NIC.
Wake on LAN Enable
Enables or disables integrated LAN to wake the system.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable onboard NIC.
PCH LAN Controller
Wake on LAN Enable
Azalia
SLP_S4 Assertion Width
Restore AC Power Loss
►PCI Express Configuration
[Enabled]
[Disabled]
[Enabled]
[4-5 Seconds]
[Power Off]
Azalia
Control Detection of the Azalia device.
Disabled - Azalia will be unconditionally disabled.
Enabled - Azalia will be unconditionally disabled.
Auto - Azalia will be enabled if present, disabled otherwise.
SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.
Restore AC Power Loss
Select AC power state when power is re-applied after a power failure.