NEXCOM NEX 607 User Manual

Page 18

NEX 607 User Manual

Chapter 1: Product Introduction

I/O Interface

▪ Serial port: 4 port

– COM1: RS232 DB-9 male connector on edge I/O
– COM2: RS232/422/485 DB-9 male connector on edge I/O
– COM3,4:RS232 2x5/2.54mm Box header

▪ USB 2.0: 10 ports

– 4 ports edge connector
– 6 ports by 2.0mm pin connector

▪ 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)

▪ On-board Power LED and HDD Active LED Pin Header

▪ 1x 4-pin fan connector (for CPU)

▪ 1x 3-pin fan connector (for System)

▪ 1x Keyboard/Mouse pin header

▪ On board Buzzer/ SMBus2.0/ Reset SW/ On &Off switch button

Edge I/O Interface

▪ 1x DVI/VGA connector

▪ 1x HDMI connector

▪ 2x dual stack USB and RJ45 connector

▪ 1x dual stack serial port connector

▪ 1x Mic-in and Line out phone Jack

Watchdog Timer

▪ Watchdog timeout can be programmed by software from 1 second to

255 seconds, and from 1 minute to 255 minutes (Tolerance 15% under
room temperature 25°C)

Storage

▪ 4x SATA port with RAID 0,1,5,10 function

System Monitor

▪ Monitoring of 4 voltages and 2 temperatures and 2 Fans speed detection

▪ 4 Voltage (Vcore, +12V , +3.3V , 5V)

▪ 2 Temperatures (CPU, System)

▪ 2 Fan Speed detection

On-board RTC

▪ On-chip RTC with battery backup

▪ 1x External Li-Ion battery

Power Input

▪ Support AT and ATX mode

Power Requirements

▪ Power requirement: +12V DC Input

▪ One 4-pin power connector

Dimensions

▪ Mini-ITX M/B form factor.

▪ 170mm (L) x 170mm (W)

Environment

▪ Operating temperatures: 0°C to 60°C

▪ Storage temperature: -20°C to 85°C

▪ Relative humidity: Operating 10% to 90%, non-condensing

Certifications

▪ CE approval

▪ FCC Class A