NEXCOM NEX 607 - Manual (Page 62)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 47 NEX 607 User Manual
Chapter 3: BIOS Setup
AMT Configuration
This section is used to configure Active Management Technology (AMT)
options.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel (R)
Active Management Technology
BIOS Extension.
Note : iAMT H/W is always
enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires
additional firmware in the SPI
device
Intel AMT
Intel AMT Setup Prompt
Intel AMT SPI Protected
[Enabled]
[Enabled]
[Disabled]
Intel® AMT
Enables or disables Intel® Active Management Technology.
Intel® AMT Setup Prompt
Enables or disables Intel® AMT setup prompt at startup.
Intel® AMT SPI Protected
Enables or disables Intel® AMT SPI write protect
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
Support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
Legacy USB Support
EHCI Hand-off
[Enabeld]
[Disabled]
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
EHCI Hand-Off
This is a workaround for OSs that does not support EHCI hand-off. The EHCI
ownership change should be claimed by the EHCI driver.
USB Configuration
This section is used to configure the USB.