NEXCOM NEX 607 User Manual

Page 69

NEX 607 User Manual

Chapter 3: BIOS Setup

Aperture Size
Select the Aperture size.

DVMT Pre-Allocated
Select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the

internal graphics device.

DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics

Device.

Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect

if external graphics is present. Secondary boot display selection will appear

based on your selection. VGA modes will be supported only on primary

display.

Secondary IGFX Boot Display
Select the secondary display device.

LVDS1 Panel Type
Select the LCD panel used by the internal graphics device.

LVDS1 Backlight Control
Configures LVDS1 backlight control settings.

LVDS1 Backlight
Configures LVDS1 backlight brightness.

Active LFP
Select the Active LFP configuration.

Panel Color Depth
Select the LFP Panel Color Depth.

NB PCIe Configuration

This section is used to configure Northbridge PCI Express settings.

PEG0 – Gen X
Configure PEG0 B0:D1:F0 Gen1-Gen2

Always Enable PEG
Enables or disables the PEG slot.

Chipset

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Configure PEG0 B0:D1:F0

Gen1-Gen2

NB PCIe Configuration

PEGO

PEGO - Gen X

Always Enable PEG

Not Present

[Auto]

[Disabled]