System agent (sa) configuration, Intel ® igfx configuration – NEXCOM NEX 607 User Manual
Page 68

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
53
NEX 607 User Manual
Chapter 3: BIOS Setup
Graphics Turbo IMON Current
Graphics turbo IMON current values supported (14-31).
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Internal Graphics
Keep IGD enabled based on the setup options.
System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
System Agent (SA) Parameters
►Intel IGFX Configuration
►NB PCIe Configuration
Intel IGFX Configuration
Selects the Graphic chip setting of Intel IGFX Configuration.
NB PCIe Configuration
Configures the NB PCI Express settings.
Intel
® IGFX Configuration
This section is used to configure the Intel® IGFX configuration.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Graphics turbo IMON current
values supported (14-31)
Intel IGFX Configuration
IGFX VBIOS Version
IGfx Frequency
Graphics Turbo IMON Current
Primary Display
Internal Graphics
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
******* LVDS Configuration *******
Primary IGFX Boot Display
Secondary IGFX Boot Display
LVDS1 Panel Type
LVDS1 Backlight Control
LVDS1 Backlight
Active LFP
Panel Color Depth
2119
650 MHz
[Auto]
[Auto]
[256MB]
[256M]
[256M]
[CRT]
[Disabled]
[1024x768 LVDS]
[Positive]
[100%]
[No LVDS]
[24 Bit]