Neotech Communications FMC-11F - Manual (Page 12)

FMC-11F Series Installation & Operation Manual
www.neotechcomm.com.tw 12
4.2.4 The 100Base-FX Connectors
The 100Base-FX Connections
The fiber port pinouts
The TX (transmit) port of device I is connected to the RX (receive) port of device II, and
the RX (receive) port of device I to the TX (transmit) port of device II.
X
value:
A
for Multimode fiber
B
for Singlemode fiber
FIBER Connector
TX
SC Optical Connector
RX
SC Optical Connector
X
value:
G for Multimode fiber
H for Singlemode fiber
FIBER Connector
TX
ST Optical Connector
RX
ST Optical Connector
The WDM 100Base-FX Connections
The fiber port pinouts
Only ONE optical fiber core is required to transmit and receive data.
* Special note for choosing WDM products:
Pair of products should be used for the optical transmission by different wavelengths (1310nm, 1550nm).
i.e. FMC-11F-C-MT should be match with FMC-11F-D-MT;
FMC-11F-E-MT should be match with FMC-11F-F-MT;
FMC-11F-I-MT should be match with FMC-11F-J-MT;
FMC-11F-K-MT should be match with FMC-11F-L-MT.
X value:
C and D for Multimode fiber
H and F
for Singlemode fiber
FIBER Connector
SC Optical Connector
X value:
I and J for Multimode fiber
K and L
for Singlemode fiber
FIBER Connector
ST Optical Connector