Neotech Communications FSW-21F-CM - Manual (Page 2)

FSW-21F-CM Series
Industrial 2-port 10/100Base-TX to 100Base-FX Switch
V3 2
The 10/100Base-TX
The 10/100Base-TX Connections
The following lists the pinouts of 10/100Base-TX ports.
Pin Regular Ports Uplink port
1 Output Transmit Data + Input Receive Data +
2 Output Transmit Data - Input Receive Data -
3 Input Receive Data + Output Transmit Data +
4 NC NC
5 NC NC
6 Input Receive Data - Output Transmit Data -
7 NC NC
8 NC NC
The Port Status LEDs, dimension drawing for the Standalone unit
LED State Indication
PWR Green Power on.
Off Power off.
FX LINK Green 100Base-FX
SPD1, 2 Green 100Base-TX
Amber 10Base-TX
LINK/ACT
1, 2
Steady A valid network connection established
Flashing Transmitting or receiving data. ACT Stands for
Activity.
Functional Description
 Converts 10/100Base-TX to 100Base-FX
 Full/Half duplex, Auto-Negotiation
 Singlemode or Multimode fiber operation
 Single or Dual-core fiber with SC or ST connectors
 Store and forward switching mechanism
 MDI/MDI-X Auto-Crossover supported
 Plug-and-Play
/ Hot-swappable
 -20 °C to 60 °C (-4 °F to 140 °F) operating temperature
 Wall-mount or operate in NC-R12 rack mount chassis
Assembly, Startup, and Dismantling
Standalone units Installation
 Assembly: Mount the standalone unit onto a fixture, e.g. a plank, (either on the wall or on a flat surface) with at least 2
screws piercing through the holes on the mounting frame to secure it in position.
 Startup: Connect the supply voltage to start up the Media Converter via the terminal block.
 Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.
Card Module Installation
 Assembly: The Card Module can be used as slide-in module to the NC-R12 (12-slot Rack Mount Chassis).
 Startup: Turn on the NC-PSU/5V for the supply voltage to start up the Switches via NC-R12.
 Dismantling: The Card Module can be removed as slide-out module form the NC-R12 (12-slot Rack Mount Chassis).
Manual Earth Green manual is available in our website. www.neotechcomm.com.tw