Monroe Electronics Electrostatic Fieldmeter - Static Monitor - model 177A User Manual
Page 88
APNE-0016
87
Useful Hazardous (Classified) Location and Intrinsic Safety References
American National Standards Institute (ANSI) and International Society for Measurement and Control
(ISA)
ISA-12.00.01-1999 (IEC 60079-0 Mod)
Electrical Apparatus for Use in Class I, Zones 0 & 1
Hazardous (Classified) Locations - General Requirements
ISA-12.01.01-1999
Definitions and Information Pertaining to Electrical
Instruments in Hazardous (Classified) Locations
ISA-12.02.01-1999 (IEC 60079-11 Mod)
Electrical Apparatus for Use in Class I, Zones 0, 1, & 2
Hazardous (Classified) Locations - Intrinsic Safety
Requirements
ANSI/ISA-RP12.6-1995
Wiring Practices for Hazardous (Classified) Locations
Instrumentation Part I: Intrinsic Safety
ANSI/ISA-TR12.24.01-1998 (IEC 79-10 Mod)
Recommended Practice for Classification of Locations for
Electrical Installations Classified as Class I, Zone 0, Zone 1,
or Zone 2
ISA
PO Box 12277, 67 Alexander Drive
Research Triangle Park, NC 27709
Telephone: 919-549-8411
Fax: 919-549-8288
E-Mail:
National Fire Prevention Association (NFPA)
NFPA 34:
Standard for Dipping and Coating Processes Using Flammable or Combustible
Liquids
NFPA 77:
Recommended Practice on Static Electricity
NFPA 325:
Guide to Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids
NFPA 497:
Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified)
Locations for Electrical Installations in Chemical Process Areas
Electrical Installations in Hazardous Locations
National Fire Protection Association
1 Batterymarch Park
PO Box 9101
Quincy, MA 02269-9101
Tel: (800) 344-3555
Fax: (617) 770-0700
Email: