ILUMINARC Ilumipod™ 7 IP - Manual (Page 14)

Operation
10 Ilumipod 7 IP Optic RGBW User Manual (Rev. 4)
Make sure to
mount this
product away
from any flammable
material as indicated in
the Safety Notes.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this product in any safe position while making sure that there is
adequate room around it for ventilation, configuration, and maintenance.
Installation
The Ilumipod 7 IP Optic RGBW includes a plate to mount it on any firm, non-
flammable surface, whether horizontally or vertically, on the floor or overhead. The
articulated arm that connects the light to the base is adjustable and it can swivel, thus
providing full angle control. A spike is included for mounting this product on soil
(gardens and large flowerpots).. ILUMINARC
® recommends following the general
guidelines below when mounting the Ilumipod 7 IP Optic RGBW.
· When selecting an installation location, consider ease of access to the product for
operation, programming adjustments and routine maintenance.
· Make sure that the location where you are mounting the product can support its
weight. Please see the Technical Specifications section of this manual for the
weight requirement of this product.
Procedure
The Ilumipod 7 IP Optic RGBW comes with a mounting base and a stake which
connect to the arm of the product. The mounting plate has four (4) 8.3 mm holes on the
corners to mount the product in any orientation to almost any surface capable of
supporting the weight of this product. The stake can be pushed into the ground and
turned in a clockwise direction to lock it into the ground
Ceiling
Mounting
Floor Mounting
In ground
Mounting