ILUMINARC Ilumipod™ 7 IP - Manual (Page 12)

Operation
8 Ilumipod 7 IP Optic RGBW User Manual (Rev. 4)
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The products in the Ilumipod 7 IP Optic RGBWcan operate with a standard DMX controller, the
Ilumicon controller, or the Ilumicode controller. The sections below will show you how to
connect these products to the corresponding controllers. The instructions to operate these
products with each of the above controllers are in the Operation chapter of this manual.
DMX Controller
The Ilumipod 7 IP Optic RGBW can work with a standard DMX controller. The channel
assignments will depend on the chosen personality (see the corresponding Menu Map on
pages
13) and the DMX address assigned to each product
(see Programming on page 11).
The figure below illustrates how to connect the DMX controller to the Ilumipod 7 IP
Optic RGBW products.