Holland Electronics NE 1101L - Manual (Page 9)

- 9 -
Forward Optical Receiver Operation Manual
Cleaning Fiber Connectors
1. Use a lint-free cloth (3 cm x 3 cm)
2. Moisten one-half of the lint-free cloth with >90% pure ethyl or alcohol, and gently wipe the connector end face
3. Use the other half of the lint-free cloth to gently wipe the connector end face, then rapidly shake the connector
4. Wait until dry to insert connector into the adapter
5. Caution: do not use any compressed air to directly blow onto the connector end face to avoid damage by dust
particles
Caution: Direct eye exposure to laser beam may cause physical damage.