Rs-485interface pin definition – Holland Electronics NE 1101L User Manual
Page 6
![background image](https://www.manualsdir.com/files/769219/content/doc006.png)
- 6 -
Forward Optical Receiver
Operation Manual
same type of connector.
RF Output
RF signal Output Port; 75
Ω F type female connector
Dummy Hole
Dummy: Not used in this type
RS-485Interface Pin Definition
This RS-485 is full duplex type, so master and slave pin assignment is not the same. The connector definition
should be as following.
Master:(PC side)
1、 Receive+
2、 Receive-
3、 Transmit-
4、 Transmit+
Slave:(TX side)
1、 Transmit+
2、 Transmit-
3、 Receive-
4、 Receive+
Please make sure AC power is off when replacing new fuse.