Holland Electronics HDTV-ST2 - Manual (Page 25)

24
Sound (Digital Audio Output Setting)
The digital channel’s sound can be output from the
rear-panel S/P DIF connectors on your Set-Top Box.
After connecting an optical digital-audio component,
you must specify the transmission format (Dolby
Digital
®
or PCM).
● Press Enter on Sound to show the audio format
option, you can press ◄ ► buttons to highlight
the desired audio format, and then press Enter to
confirm the setting.
● Press EXIT button to go back to the main menu or
press MENU button to leave.
Opacity (Changing Transparency of On-Screen-Display)
● Press ▲▼ buttons to highlight the Opacity and
press Enter.
● Use the ◄ ►buttons to change the percentage of
the On-Screen-Display’s transparency.
● Press EXIT button to go back to the main menu or
press MENU button to leave.
I-Plate (Changing Display time of the information-Plate)
● Select the I-Plate, you can press ◄ ► and ▲▼
buttons to change the Information-Plate display
time to 2, 4, 6 seconds or off mode.
● Press the EXIT button to go back to the main
menu or press the MENU button to leave.