Future Automation SPS - Manual (Page 19)

Fit the Front Panel and Moving Panels
In
st
all
at
io
n
: S
ta
ge
1
2
Page 18 of 28 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
REAR FACE OF
MOVING PANELS
Mounting Plate
Height -5mm
(Clearance)
Mounting
Plate Height
Fix the front panel to the enclosure.
Measure the height of the panel
mounting plates from the bottom and
top of the opening.
Remove the moving panels and the
panel mounting plates.
Then screw the panel mounting plates
to the rear of the moving panels.
Then fix the moving panels to the
mechanism by re-attaching the panel
mounting plates.
SPS SPLIT V & H - Sliding Panel System Split Vertical & Horizontal